Product profile
TI-G04P is a new GPON ONT product of Thinktides which is a passive optical network terminal series. it fully meets to the ITU-T G.984 standard, China Telecom (CTC) and China Netcom requirements. It embeds 1*10/100/1000M plus 3 10/100M Ethernet ports, and easily controlled by a remote system that is flexible enough to interoperate with OLT from different venders. It is suitable for home users.
Key Features
It takes the PTMP (point to multipoint)network topology, effectively collects and converges scattered Ethernet services, and provides the Ethernet standard RJ45 interface, smoothly interconnects with existing networks.
The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS.
Supports IGMP multicast, effective use of broadband;
Supports port isolation;
Supports Ethernet loop detection, it will automatically determine whether there is an Ethernet loop blocking condition present in the network, when the loop disappears, it will restore automatically.
Supports multicast VLAN;
Supports China Telecom CTC protocol;
Supports remote loopback and network status diagnosis;
Full management through an Operation Administration Maintenance (OAM) protocol based on IEEE802.3ah, including configuration, alarm, performance monitoring, fault isolation and security management, etc. It supports remote management through OLT and local console management as well.
Supports FEC and DBA;
Supports transparent bridge and spanning tree protocol;
Supports storm control;
Supports flow statistics;
LED Indication
The LEDs indicates the system status for TI-E04P.
status |
Definition |
|
PWR |
Green light on |
Connected to power supply |
PON |
Green light on |
Registered to OLT and connected to optical network. |
Blink in green |
Fiber connection is available. |
|
LOS |
Red light off |
Fiber connection is available. |
Blink in red |
Fiber connection is not available. |
|
LAN1~LAN4 |
Green light on |
Lan ports are properly connected. |
Blink in green |
sending or receiving data. |
Technical Parameters
TI-G04P |
|
User interface |
1 10/100/1000M,3 10/100M RJ45 ports. |
PON |
Transmission speed :upstream/downstream symmetrical 1Gbps Network coverage radius: 20KM Optical receive sensitivity:≥-26dBm luminous power:>0dBm Security: ONU authentication mechanism |
Protocols |
Compliant with IEEE 802.3ah, YD/T 1475-2006 IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad (LACP) Ethernet–II, Ethernet-SNAP |
VLAN |
Port-based VLAN Garp Vlan Registration Protocol (GVRP) IEEE 802.1Q VLAN |
QOS |
Backpressure flow control(half-duplex) IEEE 802.3x flow control(full-duplex) Prevent Head Of Line IEEE p802.1p, CoS WR,SP and FIFO queue scheduling algorithm Port rate limit |
Safety |
IEEE 802.1x, Port-based access control Supports local and remote Authentication CHAP,EAP certification Limits the maximum number of users on each port; Storm control, port protection |
Management |
Various management modes such as Web, TELNET Debug function. |
Size |
158mm(W) x 126mm(D) x32mm(H) |
Installation: plug and play |
|
Package size |
140mm(L) x 130mm(W) x28mm(H) |
Environment |
Operating temperature:0℃~60℃; Operating humidity:10%~85% non-condensing |
Storage temperature:-40℃~80℃; Storage humidity:5%~95% non-condensing |
|
Power |
Input :110~240VAC, output: 12V 1A |
Power consumption |
5W |
Order Information
Description |
|
TI-G04P |
4 10/100M RJ45 ports, Input :110~240VAC, output: 12V 1A |