GPON 1GE+CATV ONT
TI-G01PC
Description:
TI-G01PC ONU is 1GE+CATV ports GPON ONT, it comply with IEEE802.3ah, YD / T 1475-2006 and CTC standard. It has one fiber port with WDM, 1GE ports and one CATV RF port, good manage ability. It can be used for FTTH CATV network system.
Features
n Built-in WDM, support single fiber with 3 wavelength(1310/1490/1550)
n Support 4094pcs VLAN, support VLAN stacking (QinQ);
n Support port isolation;
n Support 8K per MAC’s wire-speed learning and aging, support MAC address restriction;
n Support 802.1w (RSTP) Spanning Tree Protocol;
n Support IGMP Snooping, support CTC controllable multicast;
n Support priority queue scheduling, support SP, WRR or SP + WRR scheduling algorithm;
n Support port speed, support for storm suppression;
n Support Telnet and CLI;
n Support remote software upgrade
Specification
Item |
Parameter |
Description |
||
Interface Specifications |
Service port
|
Provide a single PON port
Provide one CATV port |
||
Functional Specifications |
GPON Standard |
Comply with IEEE802.3ah、YD/T 1475-200 and CTC Standard |
||
VLAN |
|
Support 4094 per VLAN Support 802.1Q VLAN、SVLAN Support VLAN Stacking |
||
MAC address learning |
|
Support 8K per MAC address Support hardware-based wire-speed MAC address learning Support static MAC address, MAC address restrictions |
||
Spanning Tree Protocol |
|
Support 802.1w (RSTP) Spanning Tree Protocol |
||
Multicast |
|
Support IGMP Snooping, controllable multicast support CTC |
||
Quality of service (QoS) |
|
Support the flow classification based on the destination IP, source IP, destination MAC, source MAC, VLAN priority, VLAN ID, Ethernet frame type, 802.1p priority, DSCP, TOS. Support four priority queues, support SP, WRR or SP + WRR scheduling algorithm |
||
Flow Control |
|
Support IEEE 802.3x full-duplex flow control |
||
Management maintenance |
|
Support Telnet, support CLI management configuration |
||
Status Indication |
Indicator |
PON, LAN, CATV status indicates |
||
Optical Specifications (Forward Path) |
Wavelength |
1100~1600 |
nm |
|
Optical Power Input Range |
-20~-1 |
dBm |
|
|
Recommended Optical Power Input Range |
-15~-4 |
dBm |
|
|
Optical Input Return Loss |
≥45 |
dB |
|
|
RF Specifications (Forward Path) |
Bandwidth |
47~1003 |
MHz |
|
Flatness |
±0.75 |
dB |
47~870MHz, at 25℃ |
|
Slope |
0~1.0 |
dB |
47~870MHz, at 25 ℃ |
|
Temperature Stability |
±1.0 |
dB |
In the operating temperature range (-25℃ ~ +65℃) |
|
Output Level |
70±2 |
dBuV |
-15dBm input optical power, per channel modulation 4.0%, in the 860MHz point test, at 25℃ |
|
Return Loss |
≥14 |
dB |
47~1000MHz, at 25℃ |
|
Impedance |
75 |
Ohm |
|
|
MER |
≥33 |
dB |
-15~-4dBm input optical power |
|
User Interface |
Optical Connector Type |
SC/APC |
||
RF Output |
F connector (Metric or Imperial) |
|||
Physical Specifications |
Dimensions, weight |
152mm* 140mm* 34mm Gross Weight:0.35kg |
||
Power supply, power consumption |
100V~240V AC/50Hz~60Hz 12V1A DC power consumption:< 5W |
|||
Work Environment |
Operating Temperature:-10~55℃ Storage Temperature:-40~85℃ Humidity:10%~90% Non-condensing Storage humidity:5%~95% Non-condensing |