TI-G41W GPON ONU is our latest, Product offer: 4x FE, Option: 1x RF(CATV),1x Fiber Optical Net port(If model with CATV, Fiber Optical Port will be x2), better use for home and small enterprises. Well fit FTTH high speed data transfer.
n Providing a buzzer to alarm, it will make six seconds alarm tone when the mains failure or recovery . Using point to multipoint network topology, effectively collect users’ dispersing Ethernet services and convergence, providing four 10/100M adaptive Ethernet interfaces on the user-side, one WIFI interface (External double antenna), one CATV interface for connecting the next terminal equipments;
n DBA makes all users share the 2.5Gbps band width more reasonably , and realizes reliable QoS, ensures the quality of different services in the same network;
n Support multicast VLAN ; support IEEE802.1Q VLAN;
n Adopting GPON upstream ,meet ITU-TG.984/ standards;
n Provide remote management through OLT , support local console management ; support user-side Ethernet interface line loopback detection;
n Support DHCP Option60 reporting physical location information of the Ethernet interface;
n Support PPPoE+ features ,for accurate identification of users;
n Support IGMP Snooping;
n Support broadcast storm suppression;
n Support WIFI 802.11b/g/n;
n Support DiBi CATV access.
Model |
TI-G41W |
User interface |
4×10/100M RJ45 adaptive interfaces、1×WIFI、1×CATV(Optional) |
PON |
Tx :1.25Gbps ;RX :2.5Gbps Network coverage radius: 20 KM High sensitivity optical receiver : ≥-28dBm Optical power:>0dBm Security: ONU authentication mechanism |
Standards followed |
IEEE 802.3ah YD/T 1475-2006 IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.11b/g/n IEEE 802.1w, RSTP IEEE 802.3ad ,LACP Ethernet–II, Ethernet-SNAP |
VLAN |
Port-Based VLAN GVRP IEEE 802.1Q VLAN |
WIFI |
IEEE 802.11b/g/n WIFI |
CATV |
BiDi (fiber wavelength 1550nm/1310nm) RF frequency range:47MHz — 1000MHz PF output impedance :75Ω |
QoS |
Back pressure flow control (half duplex) IEEE 802.3x flow control(full duplex) Prevent Head Of Line mechanism IEEE p802.1p, CoS Four transmit queues at a same port map eight priority 802.1P WR、SP queue scheduling algorithm Port speed-limited |
Reliability |
UDLD |
Network security |
IEEE 802.1x, Port-based access control, support for local and remote authentication, EAP termination or transparent transmission ; maximum number of users limited per port ; Port Protect ; Packets storm control ; |
Manage modes |
Web, TELNET , and so on |
Physical size |
169mm(L)×133mm(W)×33mm(H) |
Environment |
Working environment:0℃~60℃;10%~85% , non - condensing |
Storage environment:-40℃~80℃;5%~95% , non - condensing |
|
Power interface |
110~240AC , 12V/1500MA DC , 2.1mm/5.5mm |
Power consumption |
5.0W |
Interface
Port |
Description |
LAN1-LAN4 |
RJ-45 Ethernet interface, through it to connect to the local Network, 10/100Mbps adaptive |
PON |
SC/PC Single-mode fiber socket, for connecting with operator access-network optical signal. |
RST |
Reset |
DC |
DC-in, for power supply. |
Laser IN |
CATV laser in |
CATV |
CATV output interface |
LED
LED Light |
Status |
description |
PWR |
On |
Power Good |
PON |
On |
Success Register to OLT(Optical Line Terminal) |
Blink |
Success Connect to Fiber |
|
LOS |
Off |
Success Connect to Fiber |
Blink |
Fail Connect to Fiber |
|
LAN1~LAN4 |
On |
Success Connect to LAN |
Blink |
Under Data Transfer |
|
WLAN |
On |
Wireless On |
Blink |
Wireless Status. Blink means there have Data under transfer. |
|
CATV |
On |
CATV Working |
Off |
CATV Un-Working |
Order Information
Model |
Description |
TI-G41W |
4FE+WIFI+CATV(optional) |