10/100/1000M Ethernet Fiber Media Converter
General Description
The media converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometers or hundred kilometers. This product supports IEEE802.3U IEEE802.3z 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode.
Key Features
þ LED display for easy monitoring of device status.
þ In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 100 Base-TX, IEEE802.3z, IEEE802.3abstandard.
þ Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm.
þ Half duplex: back pressure flow control.
þ Full duplex: IEEE802.3x flow control.
þ 1K MAC address table, 256K data buffer.
þ Automatic identification of MDI/MDI-X cross line.
þ In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical Parameter
|
|
10/100/1000M Media Converter |
|
Protocol |
IEEE 802.3 10 Base-T IEEE 802.3u 100 Base-TX IEEE802.3z IEEE802.3abstandard. |
|
Connector |
one UTP RJ-45 connector one SC/ST/ connector |
|
Operating mode |
full duplex mode or half duplex mode |
|
Power supply |
Power adapter (External): 110-265V AC input, 5V1A DC output Power supply (Internal): 110-265V AC input, 5V1A DC output |
|
Operating temperature |
0℃~50℃ |
|
Relative humidity |
5%~90% |
|
TP Cable |
Cat5 UTP cable |
|
Transfer fiber |
Multi-mode: 50/125, 62.5/125 or 100/140μm Single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm |
|
Dimensions |
External power supply: 94mm (L) x 71mm (W) x 26mm (H) Internal power supply: 150mm (L) x 110mm (W) x 28mm (H) |
LED indicator lamps
|
LED indicator |
Status |
Explanation |
|
Link/Act |
On |
Connection status display for link. “ON” indicates that link is in correct connection. |
|
Blink |
Active status display of fiber port or RJ45 port. “Blink” indicates packet goes through media converter. |
|
|
FDX |
On |
Transceiver works in the full duplex mode. |
|
Off |
Transceiver works in the half duplex mode. |
|
|
PWR |
On |
Power is on and normal. |
|
1000 |
On |
Transfer rate of electric interface is 1000Mbps. |
|
100 |
On |
Transfer rate of electric interface is 100Mbps. |
Transmission characteristics of single fiber transceiver
|
Product model |
Optical wavelength (nm) |
Transmitting optical power (dBm) |
Receiving sensitivity (dBm) |
Standard loss (dBm) |
|
Single/SC/SM 20km |
1310/1550 |
≥-9 |
-24 |
1310nm 0.4dBm/KM 1550nm 0.25dBm/KM 1490nm 0.25dBm/KM |
|
Single/SC/SM 40km |
1310/1550 |
> -4 |
-24 |
|
|
Single/SC/SM 60km |
1310/1550 |
> -1 |
-24 |
|
|
Single/SC/SM 80km |
1490/1550 |
≥ 0 |
-24 |
Transmission characteristics of dual fiber transceiver
|
Product model |
Optical wavelength (nm) |
Transmitting optical power (dBm) |
Sensibility (dBm) |
Loss enable (dBm) |
|
Dual/SC/MM 550m |
1310 |
-10 ~ -5 |
-23 |
7 |
|
Dual/SC/SM 20km |
1310 |
-9 ~ -3 |
-24 |
11 |
|
Dual/SC/SM 40km |
1310 |
-2 ~ 3 |
-24 |
20 |
|
Dual/SC/SM 60km |
1550 |
-3 ~ 2 |
-24 |
19 |
|
Dual/SC/SM 80km |
1550 |
-3 ~ 2 |
-24 |
24 |
|
Dual/SC/SM 100km |
1550 |
0~ 3 |
-27 |
27 |
XPON Passive Optical Network
snowthinktides
0755-83068027
sales@thinktides.com