8-Port 10/100M Fiber Switch
(2 Fiber ports +8 RJ45 ports)
General Description
TI series desktop switch is possessed of stable performance, excellent quality and reasonable price because of adopting latest IC and high quality of transceivers. It is ideal for use as a CPE device at the customer's network edge as well as in a fiber infrastructure. It is also an ideal solution for delivering Ethernet-based services to customers quickly and cost effectively.
Key Features
-Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
-The Fiber slot supports 1000M and Full Duplex mode.
-Supports flow control and broadcast storm protection.
-Supports VLAN and QoS.
-Supports max 10K bytes frame.
-low power consume (6W), low heat, and good reliability.
-LED indicator to show the device’s work status.
-Fiber port: SC, ST, FC, SFP are Optional
Technical Parameter
|
10-Port Gigabit Fiber Switch(2 FO+8 RJ45) |
Standards Compliance |
IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX |
MAC address table |
1K |
Frame buffer memory |
1M |
Switching capacity |
12G |
Connector |
UTP: RJ-45, 10/100/1000Mbps Fiber slot: 1000Mbps |
Supported Cable |
UTP: Cat.5 or 6 UTP(the max distance up to 100m) MMF: 50/125, 62.5/125μm(the distance varies from 224m to 550m) SMF:8/125, 8.7/125, 9/125μm(the distance varies from 10 to 100 km) |
Flow control |
Full Duplex: IEEE802.3x flow control Half Duplex: back pressure flow control |
LED Indicators |
PWR, F1 Link/Act, F2 Link/Act, TP1~TP4 Link/Act, TP1~TP4 100, TP1~TP4 1000 |
Power Supply |
AC 220V(100-240V), 50~60Hz; DC 5V, 2A |
Operating Temperature |
0 ~ +60℃ |
Storage Temperature: |
20 ~ +70℃ |
Humidity |
5% ~ 90% |
Dimensions |
26(H)×90(W)×202(D)mm |
Explanation for LED indicators
LED indicator |
Status |
Explanation |
Link/Act |
On |
Connection status display for link. “ON” indicates that link is in correct connection. |
Blink |
Active status display of fiber port or RJ45 port “Blink” indicates packet goes through media converter |
|
PWR |
On |
Power is on and normal. |
1000 |
On |
Transfer rate of electric interface is 1000Mbps. |
100 |
On |
Transfer rate of electric interface is 100Mbps. |
Transmission characteristics of single and dual fiber transceiver
Type of optical fiber |
Interface |
Wavelength (nm) |
Transmitting optical power (dBm) |
Receiving sensitivity (dBm) |
Transmission distance (km) |
Loss allowed (dBm) |
Dual fiber MM |
ST/SC/FC |
1310 |
-14 ~ -9 |
-34 |
2 |
10 |
Dual fiber SM |
ST/SC/FC |
1310 |
-13 ~ -4 |
-33 |
20 |
19 |
Dual fiber SM |
SC |
1310 |
-8 ~ -3 |
-35 |
40 |
27 |
Dual fiber SM |
SC |
1310 |
-5 ~ 0 |
-36 |
60 |
34 |
Dual fiber SM |
SC |
1550 |
-5 ~ -0 |
-36 |
80 |
27 |
Dual fiber SM |
SC |
1550 |
-5 ~ 0 |
-36 |
100 |
31 |
Dual fiber SM |
SC |
1550 |
-2 ~ 3 |
-37 |
120 |
35 |
Single fiber SM |
SC |
1310/1550 |
-12 ~ -3 |
-35 |
20 |
Standard loss:1310nm 0.4/km 1550nm 0.25/km |
Single fiber SM |
SC |
1310/1550 |
-8 ~ -3 |
-35 |
30 |
|
Single fiber SM |
SC |
1310/1550 |
-5 ~ 0 |
-36 |
40~60 |
|
Single fiber SM |
SC |
1310/1550 |
-3 ~ 3 |
-36 |
60~80 |