Home 
XPON Passive Optical Network> Ethernet Switch > Core Switch > 1Fiber+4UTP Switch > 10/100M Fiber Switch (1 Fiber port+ 4 RJ45 ports)
Unmanaged 10/100M Fiber Switch
(1 Fiber port+ 4 RJ45 ports)
General Description
TI series desktop switch is possessed of stable performance, excellent quality and reasonable price because of adopting latest IC and high quality of transceivers. It is ideal for use as a CPE device at the customer's network edge as well as in a fiber infrastructure. It is also an ideal solution for delivering Ethernet-based services to customers quickly and cost effectively.
Key Features
-In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 100 Base-TX/FX standard;
-Support 1k MAC address;
-Power and link LED indicators;
-Back pressure flow control for full duplex IEEE 802.3X and half duplex;
-Automatic identification of MDI/MDI-X cross line;
-Support max forwarding packet length 1552/ 1536 bytes option;
-Can be rack mounted in 3.5U 14 slots rack;
-In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical Parameter
|
|
10/100M Fiber Switch(1 Fiber port + 4 RJ45 ports) |
|
Standards Compliance |
IEEE802.3 10 Base-T, IEEE 802.3u 100Base-TX/FX |
|
MAC address table |
1K |
|
Connector |
UTP: RJ-45, 10/100Mbps Fiber slot: 100Mbps SC or ST |
|
Supported Cable |
UTP: Cat.5 UTP(the max distance up to 100m) MMF: 50/125, 62.5/125, 100/140μm(the distance varies from 224m to 550m) SMF: 8/125, 8.7/125, 9/125, 10/125μm(the distance varies from 10 to 100 km) |
|
Flow control |
Full Duplex: IEEE802.3x flow control Half Duplex: back pressure flow control |
|
Operation mode |
Full Duplex Mode or Half Duplex Mode |
|
LED Indicators |
PWR, Link/Act, SPD |
|
Power Supply |
DC 5V1A |
|
Operating Temperature |
0 ~ +60℃ |
|
Storage Temperature: |
20 ~ +70℃ |
|
Humidity |
5% ~ 90% |
|
Dimensions |
26(H)×84(W)×120(D)mm |
Explanation for LED indicator lamp
|
LED indicator lamp |
Status |
Explanation |
|
Link/Act |
On |
“ON” indicates that Fiber link is in correct connection. |
|
Blink |
“Blink” indicates packet goes through Fx /Tx end. |
|
|
PWR |
On |
Power is on and normal. |
|
SPD |
On |
Transfer rate of electric interface is 100Mbps. |
|
Off |
Rate of electric interface is 10Mbps |
|
|
DUP |
On |
Full duplex mode |
|
Off |
Half duplex mode |
|
|
Blink |
Data collision |
Transmission characteristics of single and dual fiber transceiver
|
Type of optical fiber |
Interface |
Wavelength (nm) |
Transmitting optical power (dBm) |
Receiving sensitivity (dBm) |
Transmission distance (km) |
Loss allowed (dBm) |
|
Dual fiber MM |
ST/SC/FC |
1310 |
-14 ~ -9 |
-34 |
2 |
10 |
|
Dual fiber SM |
ST/SC/FC |
1310 |
-13 ~ -4 |
-33 |
20 |
19 |
|
Dual fiber SM |
SC |
1310 |
-8 ~ -3 |
-35 |
40 |
27 |
|
Dual fiber SM |
SC |
1310 |
-5 ~ 0 |
-36 |
60 |
34 |
|
Dual fiber SM |
SC |
1550 |
-5 ~ -0 |
-36 |
80 |
27 |
|
Dual fiber SM |
SC |
1550 |
-5 ~ 0 |
-36 |
100 |
31 |
|
Dual fiber SM |
SC |
1550 |
-2 ~ 3 |
-37 |
120 |
35 |
|
Single fiber SM |
SC |
1310/1550 |
-12 ~ -3 |
-35 |
20 |
Standard loss:1310nm 0.4/km 1550nm 0.25/km |
|
Single fiber SM |
SC |
1310/1550 |
-8 ~ -3 |
-35 |
30 |
|
|
Single fiber SM |
SC |
1310/1550 |
-5 ~ 0 |
-36 |
40~60 |
|
|
Single fiber SM |
SC |
1310/1550 |
-3 ~ 3 |
-36 |
60~80 |
snowthinktides
0755-83068027
sales@thinktides.com